With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Excavators
Compare Models
UNITS:
Metric
Imperial
Engine
Net Power - ISO 9249
80.9 kW
108 hp
80.9 kW
108 hp
73 kW
98 hp
Net Power - ISO 9249 (DIN)
110 hp (metric)
110 hp (metric)
110 hp (metric)
110 hp (metric)
-
Engine Model
Cat C3.6
Cat C3.6
Cat C3.6
Cat C3.6
Cat C3.6
Cat C3.6
Engine Power - ISO 14396:2002
82 kW
110 hp
82 kW
110 hp
74 kW
100 hp
Engine Power - ISO 14396 (DIN)
111 hp (metric)
111 hp (metric)
111 hp (metric)
111 hp (metric)
-
Bore
98 mm
4 in
98 mm
4 in
98 mm
4 in
Stroke
120 mm
5 in
120 mm
5 in
120 mm
5 in
Displacement
3.6 l
220 in³
3.6 l
220 in³
3.6 l
220 in³
Biodiesel Capability
Up to B20¹
Up to B20¹
Up to B20¹
Up to B20¹
Up to B20¹
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Hydraulic System
Main System - Maximum Flow
247 L/min (65 gal/min)
247 L/min (65 gal/min)
276 l/min (73 gal/min)
276 l/min (73 gal/min)
247 L/min (65 gal/min)
247 L/min (65 gal/min)
Maximum Pressure - Equipment
35000 kPa
5075 psi
35000 kPa
5075 psi
35000 kPa
5075 psi
Maximum Pressure - Travel
35000 kPa
5075 psi
35000 kPa
5075 psi
35000 kPa
5075 psi
Maximum Pressure - Swing
26000 kPa
3770 psi
26000 kPa
3770 psi
26000 kPa
3770 psi
Swing Mechanism
Swing Speed
11.5 r/min
11.5 r/min
12 r/min
12 r/min
11.5 r/min
11.5 r/min
Maximum Swing Torque
35 kN·m
25741 ft·lbf
35 kN·m
25815 ft·lbf
35 kN·m
25815 ft·lbf
Weights
Operating Weight
13800 kg
30400 lb
15400 kg
34000 lb
15400 kg
34000 lb
Service Refill Capacities
Fuel Tank Capacity
258 l
68.2 gal (US)
187 l
49 gal (US)
187 l
49.4 gal (US)
Cooling System
15 l
4 gal (US)
15 l
4 gal (US)
15 l
4 gal (US)
Engine Oil
8 l
2.1 gal (US)
8 l
2 gal (US)
8 l
2.1 gal (US)
Final Drive - Each
3 l
0.8 gal (US)
3 l
1 gal (US)
3 l
0.8 gal (US)
Hydraulic System - Including Tank
85 l
22.5 gal (US)
85 l
22.5 gal (US)
85 l
22.5 gal (US)
Hydraulic Tank
70 l
18.5 gal (US)
72 l
19 gal (US)
72 l
19 gal (US)
DEF Tank
21 l
5.6 gal (US)
21 l
6 gal (US)
-
Dimensions
Boom
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Stick
Reach R3.0 m (9'8")
Reach R3.0 m (9'8")
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Bucket
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
Shipping Height - Top of Cab
2810 mm
9.2 ft
2810 mm
9.2 ft
2810 mm
9.2 ft
Handrail Height
2810 mm
9.2 ft
2860 mm
9.3 ft
2860 mm
9.4 ft
Shipping Length
7780 mm
25.5 ft
7530 mm
24.7 ft
-
Tail Swing Radius
2190 mm
7.2 ft
1570 mm
5.1 ft
1570 mm
5.1 ft
Length to Center of Rollers
3040 mm
9.9 ft
3040 mm
9.9 ft
3040 mm
10 ft
Track Gauge
1990 mm
6.5 ft
1990 mm
6.5 ft
-
Transport Width
2490 mm
8.1 ft
2490 mm
8.1 ft
2690 mm
8.8 ft
Shipping Length - with Blade
-
8090 mm
26.5 ft
8090 mm
26.5 ft
Counterweight Clearance
-
880 mm
2.8 ft
880 mm
2.9 ft
Ground Clearance
-
440 mm
1.4 ft
440 mm
1.4 ft
Track Length
-
3750 mm
12.3 ft
3750 mm
12.3 ft
Working Ranges and Forces
Maximum Digging Depth
6040 mm
19.8 ft
5990 mm
19.6 ft
5990 mm
19.6 ft
Boom
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Stick
Reach R3.0 m (9'8")
Reach R3.0 m (9'8")
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Bucket
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
Maximum Reach at Ground Level
8660 mm
29.4 ft
8690 mm
28.5 ft
8690 mm
28.5 ft
Maximum Cutting Height
8830 mm
28.9 ft
-
9690 mm
31.7 ft
Maximum Vertical Wall Digging Depth
5190 mm
17 ft
5180 mm
16.9 ft
-
Stick Digging Force - ISO
59.29 kN
13330 lbf
59.29 kN
13330 lbf
59.27 kN
13330 lbf
Maximum Loading Height
-
7220 mm
23.6 ft
7220 mm
23.6 ft
Minimum Loading Height
-
2080 mm
6.8 ft
2080 mm
6.8 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
-
5810 mm
19 ft
-
Minimum Working Equipment Radius
-
2240 mm
7.3 ft
2240 mm
7.3 ft
Bucket Digging Force - ISO
-
98.67 kN
22180 lbf
98.67 kN
22180 lbf
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
Sustainability
Recyclability
95%
95%
95%
95%