With our huge inventory of new, used and rental equipment, WesTrac has the right machine for the job.
Excavators
Compare Models
UNITS:
Metric
Imperial
Engine
Net Power - ISO 9249
258.3 kW
346 hp
258 kW
346 hp
330 kW
443 hp
Net Power - ISO 9249 (DIN)
351 hp (metric)
351 hp (metric)
-
449 hp (metric)
449 hp (metric)
Engine Model
Cat C9.3B
Cat C9.3B
Cat C9.3
Cat C9.3
Cat C13B
Cat C13B
Engine Power - ISO 14396:2002
259 kW
347 hp
259 kW
347 hp
332 kW
445 hp
Engine Power - ISO 14396 (DIN)
352 hp (metric)
352 hp (metric)
-
451 hp (metric)
451 hp (metric)
Bore
115 mm
5 in
115 mm
5 in
130 mm
5 in
Stroke
149 mm
6 in
149 mm
6 in
157 mm
6 in
Displacement
9.3 l
568 in³
9.3 l
568 in³
12.5 l
763 in³
Biodiesel Capability
Up to B20¹
Up to B20¹
-
Up to B20¹
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
emission standards.
-
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
-
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
-
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Hydraulic System
Main System - Maximum Flow
560 l/min
148 gal/min
630 l/min (166 gal/min)
630 l/min (166 gal/min)
779 l/min (206 gal/min)
779 l/min (206 gal/min)
Maximum Pressure - Equipment
35000 kPa
5076 psi
35000 kPa
5076 psi
35000 kPa
5076 psi
Maximum Pressure - Equipment - Lift Mode
38000 kPa
5511 psi
-
38000 kPa
5511 psi
Maximum Pressure - Travel
35000 kPa
5076 psi
35000 kPa
5076 psi
35000 kPa
5076 psi
Maximum Pressure - Swing
29400 kPa
4264 psi
28000 kPa
4061 psi
26000 kPa
3771 psi
Swing Mechanism
Swing Speed
8.84 r/min
8.84 r/min
8.27 r/min
8.27 r/min
8.3 r/min
8.3 r/min
Maximum Swing Torque
143 kN·m
105214 ft·lbf
155 kN·m
114543 ft·lbf
189 kN·m
139000 ft·lbf
Weights
Operating Weight
37700 kg
83100 lb
42200 kg
93000 lb
48900 kg
107800 lb
Service Refill Capacities
Fuel Tank Capacity
600 l
158.5 gal (US)
600 l
158.5 gal (US)
715 l
188.9 gal (US)
Cooling System
40 l
10.5 gal (US)
40 l
10.5 gal (US)
52 l
13.7 gal (US)
Engine Oil
32 l
8.5 gal (US)
32 l
8.5 gal (US)
40 l
10.6 gal (US)
Swing Drive - Each
18 l
4.8 gal (US)
-
-
Final Drive - Each
8 l
2.1 gal (US)
8 l
2.1 gal (US)
9.5 l
2.5 gal (US)
Hydraulic System - Including Tank
373 l
98.5 gal (US)
423 l
111.7 gal (US)
550 l
145.3 gal (US)
Hydraulic Tank
161 l
42.5 gal (US)
186 l
49.1 gal (US)
217 l
57.3 gal (US)
DEF Tank
80 l
21.1 gal (US)
-
80 l
21.1 gal (US)
Swing Drive
-
13.5 l
3.6 gal (US)
10.5 l
2.8 gal (US)
Dimensions
Boom
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
Reach 6.9m (22.8"")
Reach 6.9m (22.8"")
Reach 6.9 m (22'8")
Reach 6.9 m (22'8")
Stick
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
R2.9TB (9'6"")
R2.9TB (9'6"")
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
Bucket
HD 2.36 m³ (3.08 yd³)
HD 2.36 m³ (3.08 yd³)
HD 2.41 m³ (3.15 yd³)
HD 2.41 m³ (3.15 yd³)
HD 3.3 m³ (4.32 yd³)
HD 3.3 m³ (4.32 yd³)
Shipping Height - Top of Cab
3180 mm
10.5 ft
3230 mm
10.6 ft
3230 mm
10.7 ft
Handrail Height
3180 mm
10.5 ft
3370 mm
11.1 ft
3370 mm
11.1 ft
Shipping Length
11180 mm
36.8 ft
11600 mm
38.1 ft
11900 mm
39.1 ft
Tail Swing Radius
3530 mm
11.7 ft
3530 mm
11.6 ft
3760 mm
12.4 ft
Counterweight Clearance
1260 mm
4.2 ft
1300 mm
4.3 ft
1280 mm
4.2 ft
Ground Clearance
510 mm
1.8 ft
520 mm
1.7 ft
475 mm
1.7 ft
Track Length
5030 mm
16.6 ft
5030 mm
16.5 ft
5370 mm
17.7 ft
Track Length to Center of Rollers
4040 mm
13.3 ft
4040 mm
13.3 ft
4360 mm
14.4 ft
Track Gauge
2740 mm
9 ft
2740 mm
9 ft
2740 mm
9 ft
Transport Width - 850 mm (33”) Shoes
3590 mm
11.9 ft
-
-
Transport Width
-
3340 mm
11 ft
3640 mm
11.11 ft
Working Ranges and Forces
Maximum Digging Depth
8210 mm
26.9 ft
7200 mm
23.6 ft
8210 mm
26.11 ft
Boom
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
Reach 6.9m (22.8"")
Reach 6.9m (22.8"")
Reach 6.9 m (22'8")
Reach 6.9 m (22'8")
Stick
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
R2.9TB (9'6"")
R2.9TB (9'6"")
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
Bucket
HD 2.36 m³ (3.08 yd³)
HD 2.36 m³ (3.08 yd³)
HD 2.41 m³ (3.15 yd³)
HD 2.41 m³ (3.15 yd³)
HD 3.3 m³ (4.32 yd³)
HD 3.3 m³ (4.32 yd³)
Maximum Reach at Ground Level
11760 mm
38.6 ft
11290 mm
37 ft
12150 mm
39.9 ft
Maximum Cutting Height
10740 mm
35.3 ft
10540 mm
34.6 ft
10730 mm
35.2 ft
Maximum Loading Height
7470 mm
24.5 ft
7210 mm
23.7 ft
7420 mm
24.4 ft
Minimum Loading Height
1890 mm
6.2 ft
3130 mm
10.3 ft
2200 mm
7.3 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
8080 mm
26.5 ft
7040 mm
23 ft
8080 mm
26.6 ft
Maximum Vertical Wall Digging Depth
6420 mm
21.1 ft
5390 mm
17.7 ft
5860 mm
19.3 ft
Bucket Digging Force - ISO
210 kN
47190 lbf
235 kN
52860 lbf
267 kN
60000 lbf
Stick Digging Force - ISO
145 kN
32480 lbf
180 kN
40530 lbf
183 kN
41100 lbf
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.