Excavators

Compare Models

336 -Tier 4 / Stage V
336 -Tier 4 / Stage V
  • 336 GC
  • 340 - Tier 4 / Stage V
  • 345 GC
  • 352
  • 374 - Tier 4 / Stage V
  • 395 - Tier 4 / Stage V
336 GC
  • 336 -Tier 4 / Stage V
  • 340 - Tier 4 / Stage V
  • 345 GC
  • 352
  • 374 - Tier 4 / Stage V
  • 395 - Tier 4 / Stage V
340 - Tier 4 / Stage V
  • 336 -Tier 4 / Stage V
  • 336 GC
  • 345 GC
  • 352
  • 374 - Tier 4 / Stage V
  • 395 - Tier 4 / Stage V
UNITS:
Metric
Imperial
Net Power - ISO 9249
223.5 kW
300 hp
 
195 kW
259 hp
 
258.3 kW
346 hp
Engine Model
Cat C7.1 TTA
Cat C7.1 TTA
 
Cat C7.1
Cat C7.1
 
Cat C9.3B
Cat C9.3B
Bore
105 mm
4 in
 
105 mm
4 in
 
115 mm
5 in
Stroke
135 mm
5 in
 
135 mm
5 in
 
149 mm
6 in
Displacement
7.01 l
428 in³
 
7.1 l
433 in³
 
9.3 l
568 in³
Biodiesel Capability
Up to B20¹
Up to B20¹
 
-
 
Up to B20¹
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
 
-
 
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
 
-
 
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
 
-
 
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Engine Power - ISO 14396:2002
-
 
195 kW
261 hp
 
259 kW
347 hp
Net Power - ISO 9249 (DIN)
-
 
-
 
351 hp (metric)
351 hp (metric)
Engine Power - ISO 14396 (DIN)
-
 
-
 
352 hp (metric)
352 hp (metric)
Main System - Maximum Flow
560 l/min
148 gal/min
 
559 l/min (148 gal/min)
559 l/min (148 gal/min)
 
560 l/min
148 gal/min
Maximum Pressure - Equipment
35000 MPa
5076 psi
 
35000 kPa
5076 psi
 
35000 kPa
5076 psi
Maximum Pressure - Travel
35000 MPa
5076 psi
 
35000 kPa
5076 psi
 
35000 kPa
5076 psi
Maximum Pressure - Swing
29400 MPa
4264 psi
 
28000 kPa
4061 psi
 
29400 kPa
4264 psi
Maximum Pressure - Equipment - Lift Mode
-
 
-
 
38000 kPa
5511 psi
Swing Speed
8.84 r/min
8.84 r/min
 
8.74 r/min
8.74 r/min
 
8.84 r/min
8.84 r/min
Maximum Swing Torque
-
 
137 kN·m
101168 ft·lbf
 
143 kN·m
105214 ft·lbf
Operating Weight
36800 kg
81100 lb
 
33900 kg
74800 lb
 
37700 kg
83100 lb
Fuel Tank Capacity
600 l
158.5 gal (US)
 
600 l
158.5 gal (US)
 
600 l
158.5 gal (US)
Cooling System
39 l
10.2 gal (US)
 
19 l
4.9 gal (US)
 
40 l
10.5 gal (US)
Engine Oil
25 l
6.6 gal (US)
 
20 l
5.3 gal (US)
 
32 l
8.5 gal (US)
Swing Drive - Each
18 l
4.8 gal (US)
 
18 l
4.8 gal (US)
 
18 l
4.8 gal (US)
Final Drive - Each
8 l
2.1 gal (US)
 
8 l
2.1 gal (US)
 
8 l
2.1 gal (US)
Hydraulic System - Including Tank
373 l
98.5 gal (US)
 
373 l
98.5 gal (US)
 
373 l
98.5 gal (US)
Hydraulic Tank
161 l
42.5 gal (US)
 
161 l
42.5 gal (US)
 
161 l
42.5 gal (US)
DEF Tank
50 l
13.2 gal (US)
 
-
 
80 l
21.1 gal (US)
Transport Width
3190 m
10.5 lb/in
 
3190 mm
10.5 ft
 
-
Boom
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
 
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
 
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
Stick
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
 
Reach 3.2 m (10'6")
Reach 3.2 m (10'6")
 
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
Bucket
HD 2.00 m³ (2.61 yd³)
HD 2.00 m³ (2.61 yd³)
 
HD 1.88 m³ (2.46 yd³)
HD 1.88 m³ (2.46 yd³)
 
HD 2.36 m³ (3.08 yd³)
HD 2.36 m³ (3.08 yd³)
Counterweight Clearance
1260 mm
4.2 ft
 
1250 mm
4.1 ft
 
1260 mm
4.2 ft
Ground Clearance
510 mm
1.8 ft
 
510 mm
1.7 ft
 
510 mm
1.8 ft
Track Length to Center of Rollers
4040 mm
13.3 ft
 
3610 mm
11.8 ft
 
4040 mm
13.3 ft
Transport Width - 850 mm (33”) Shoes
3590 mm
11.9 ft
 
-
 
3590 mm
11.9 ft
Shipping Height - Top of Cab
-
 
3170 mm
10.4 ft
 
3180 mm
10.5 ft
Handrail Height
-
 
3160 mm
10.4 ft
 
3180 mm
10.5 ft
Shipping Length
-
 
11170 mm
36.6 ft
 
11180 mm
36.8 ft
Tail Swing Radius
-
 
3530 mm
11.6 ft
 
3530 mm
11.7 ft
Track Length
-
 
4590 mm
15.1 ft
 
5030 mm
16.6 ft
Track Gauge
-
 
2590 mm
8.5 ft
 
2740 mm
9 ft
Boom
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
 
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
 
Reach 6.5 m (21'4")
Reach 6.5 m (21'4")
Stick
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
 
Reach 3.2 m (10'6")
Reach 3.2 m (10'6")
 
Reach 3.9 m (12'10")
Reach 3.9 m (12'10")
Bucket
HD 2.00 m³ (2.61 yd³)
HD 2.00 m³ (2.61 yd³)
 
HD 1.88 m³ (2.46 yd³)
HD 1.88 m³ (2.46 yd³)
 
HD 2.36 m³ (3.08 yd³)
HD 2.36 m³ (3.08 yd³)
Maximum Cutting Height
10740 mm
35.3 ft
 
10300 mm
33.8 ft
 
10740 mm
35.3 ft
Maximum Digging Depth
-
 
7520 mm
24.7 ft
 
8210 mm
26.9 ft
Maximum Reach at Ground Level
-
 
11050 mm
36.3 ft
 
11760 mm
38.6 ft
Maximum Loading Height
-
 
7080 mm
23.2 ft
 
7470 mm
24.5 ft
Minimum Loading Height
-
 
2580 mm
8.5 ft
 
1890 mm
6.2 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
-
 
7360 mm
24.1 ft
 
8080 mm
26.5 ft
Maximum Vertical Wall Digging Depth
-
 
5660 mm
18.6 ft
 
6420 mm
21.1 ft
Bucket Digging Force - ISO
-
 
197 kN
44350 lbf
 
210 kN
47190 lbf
Stick Digging Force - ISO
-
 
148 kN
33160 lbf
 
145 kN
32480 lbf
Recyclability
98%
98%
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
 
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
X
This site uses and sets "cookies" on your computer to help make this website better. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.
Confirm