Wheel Loaders

Compare Models

995
995
  • 988 GC
  • 988 XE
  • 990
  • 992
  • 993
988 GC
  • 988 XE
  • 990
  • 992
  • 993
  • 995
988 XE
  • 988 GC
  • 990
  • 992
  • 993
  • 995
UNITS:
Metric
Imperial
Engine Model
Cat® 3516E
Cat® 3516E
 
Cat® C15
Cat® C15
 
Cat® C18 ™
Cat® C18 ™
Emissions
U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
 
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
 
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Engine Power - ISO 14396:2002
1377 kW
1847 hp
 
335 kW
449 hp
 
432 kW
580 hp
Gross Power - SAE J1995:2014
1394 kW
1870 hp
 
340 kW
456 hp
 
436 kW
588 hp
Net Power - SAE J1349 - Standard Ambient
1297 kW
1739 hp
 
-
 
-
Net Power - SAE J1349 - High Ambient
1265 kW
1696 hp
 
-
 
-
Bore
170 mm
6.7 in
 
137 mm
5.4 in
 
145 mm
5.7 in
Stroke
215 mm
8.5 in
 
171.5 mm
6.75 in
 
183 mm
7.2 in
Displacement
78.1 l
4766 in³
 
15.2 l
927 in³
 
18.1 l
1105 in³
Peak Torque - 1,200 rpm - SAE J1995
11591 N·m
8549 lb/ft
 
2411 N·m
1778 ft·lbf
 
3023 N·m
2230 ft·lbf
Torque Rise
39%
39%
 
16%
16%
 
58%
58%
Note (1)
The power ratings apply when tested under the reference conditions for the specified standard.
The power ratings apply when tested under the reference conditions for the specified standard.
 
-
 
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
 
-
 
-
Note (3)
The gross power advertised is with the fan at maximum speed.
The gross power advertised is with the fan at maximum speed.
 
-
 
-
Rated Speed
-
 
2000
2000
 
1,700 rpm
1,700 rpm
Peak Power Speed
-
 
1600
1600
 
1,500 rpm
1,500 rpm
Net Power - SAE J1349:2011
-
 
278 kW
373 hp
 
401 kW
538 hp
Operating Weight - Standard
246651 kg
543772 lb
 
-
 
52781 kg
116362 lb
Operating Weight - High Lift
248421 kg
547675 lb
 
-
 
54258 kg
119618 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
54.4 t
60 ton (US)
 
-
 
-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
45.3 t
50 ton (US)
 
-
 
-
Rated Payload - High Lift (Low to Moderate Digging Resistance)
49.9 t
55 ton (US)
 
-
 
-
Rated Payload - High Lift (Moderate to High Digging Resistance)
45.3 t
50 ton (US)
 
-
 
-
Note
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
 
-
 
-
Cat Truck Match - Standard
785/789
785/789
 
-
 
-
Cat Truck Match - High Lift
789/793/794
789/793/794
 
772/773/775
772/773/775
 
-
Bucket Capacity Range
17.2-43.6 m3 (22.3-57 yd3)
17.2-43.6 m3 (22.3-57 yd3)
 
6.4-7.6 m3 (8.3-10 yd3)
6.4-7.6 m3 (8.3-10 yd3)
 
4.7-13 m3 (6.2-17 yd3)
4.7-13 m3 (6.2-17 yd3)
Operating Weight
-
 
53006 kg
116858 lb
 
52781 kg
116362 lb
Rated Payload - Quarry Face
-
 
11.3 t
12.5 ton (US)
 
-
Rated Payload - Standard (Quarry Face)
-
 
-
 
11.3 t
12.5 ton (US)
Rated Payload - Loose Material (Standard)
-
 
-
 
14.5 t
16 ton (US)
Transmission Type
Cat Planetary Power Shift
Cat Planetary Power Shift
 
Cat planetary power shift
Cat planetary power shift
 
Cat switched reluctance electric drive
Cat switched reluctance electric drive
Forward - 1
7.4 km/h
4.6 mile/h
 
7.3 km/h
5 mile/h
 
-
Forward - 2
12.9 km/h
8 mile/h
 
12.2 km/h
8 mile/h
 
-
Forward - 3
21.9 km/h
13.6 mile/h
 
-
 
-
Reverse - 1
8.1 km/h
5 mile/h
 
7.6 km/h
5 mile/h
 
-
Reverse - 2
14.1 km/h
8.8 mile/h
 
13.6 km/h
8 mile/h
 
-
Reverse - 3
24 km/h
14.9 mile/h
 
-
 
-
Direct Drive - Forward 1
Lock-up disables
Lock-up disables
 
Lock-up disabled
Lock-up disabled
 
-
Direct Drive - Forward 2
14 km/h
8.7 mile/h
 
12.7 km/h
8 mile/h
 
-
Direct Drive - Forward 3
24.5 km/h
15.2 mile/h
 
22 km/h
14 mile/h
 
-
Direct Drive - Reverse 1
Lock-up disables
Lock-up disables
 
Lock-up disabled
Lock-up disabled
 
-
Direct Drive - Reverse 2
15.5 km/h
9.6 mile/h
 
14.1 km/h
9 mile/h
 
-
Direct Drive - Reverse 3
27 km/h
16.8 mile/h
 
25 km/h
16 mile/h
 
-
Note
Travel speeds based on 58/85-57 tires.
Travel speeds based on 58/85-57 tires.
 
-
 
-
Direct Drive - Forward 4
-
 
39 km/h
24 mile/h
 
-
Direct Drive - Reverse 4
-
 
40.8 km/h
25.4 mile/h
 
-
Forward 1 (virtual)
-
 
-
 
7 km/h
4.3 mile/h
Forward 2 (virtual)
-
 
-
 
11.3 km/h
7 mile/h
Forward 3 (virtual)
-
 
-
 
22.2 km/h
13.8 mile/h
Forward 4 (virtual)
-
 
-
 
32.1 km/h
20 mile/h
Reverse 1 (virtual)
-
 
-
 
7 km/h
4.3 mile/h
Reverse 2 (virtual)
-
 
-
 
11.3 km/h
7 mile/h
Reverse 3 (virtual)
-
 
-
 
28.2 km/h
17.5 mile/h
Lift/Tilt System - Circuit
Positive Flow Control
Positive Flow Control
 
EH - Load Sense
EH - Load Sense
 
EH-Positive Flow Control, Flow Sharing
EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump
Variable Displacement Piston
Variable Displacement Piston
 
-
 
Variable displacement piston
Variable displacement piston
Maximum Flow at 1,700 rpm Engine Speed
2047 l/min
541 gal/min
 
-
 
-
Relief Valve Setting - Lift/Tilt
34500 kPa
5004 psi
 
31700 kPa
4598 psi
 
32800 kPa
4757 psi
Cylinders, Double Acting - Lift, Bore and Stroke
370 × 1713 mm (14.6 × 67.4 in)
370 × 1713 mm (14.6 × 67.4 in)
 
190 mm x 1216 mm (7.5 in x 48 in)
190 mm x 1216 mm (7.5 in x 48 in)
 
-
Cylinders, Double Acting - Tilt, Bore and Stroke
310 × 1086 mm (12.2 × 42.8 in)
310 × 1086 mm (12.2 × 42.8 in)
 
170 mm x 722 mm (6.7 in x 28.4 in)
170 mm x 722 mm (6.7 in x 28.4 in)
 
-
Pilot System
Open Loop and Pressure Reducing
Open Loop and Pressure Reducing
 
Variable displacement piston
Variable displacement piston
 
-
Lift/Tilt System
-
 
2X x 145 cc Variable displacement piston
2X x 145 cc Variable displacement piston
 
-
Maximum Flow at 2,165 rpm
-
 
600 l/min
159 gal/min
 
-
Tilt Cylinder - Stroke
-
 
685 mm
27 in
 
685 mm
27 in
Maximum Flow at 1,400-1,600 rpm
-
 
-
 
580 l/min
153 gal/min
Lift Cylinder - Bore
-
 
-
 
210 mm
8.7 in
Lift Cylinder - Stroke
-
 
-
 
1050 mm
41.3 in
Tilt Cylinder - Bore
-
 
-
 
269 mm
8.7 in
Rack Back
4.9 s
4.9 s
 
3.8 s
3.8 s
 
4.5 s
4.5 s
Raise
12.6 s
12.6 s
 
7.5 s
7.5 s
 
8 s
8 s
Dump
3.1 s
3.1 s
 
3 s
3 s
 
2.2 s
2.2 s
Lower Float Down
4.2 s
4.2 s
 
4.6 s
4.6 s
 
3.5 s
3.5 s
Total Hydraulic Cycle Time - Empty Bucket
-
 
18.9 s
18.9 s
 
-
Total Hydraulic Cycle Time
-
 
-
 
18.2 s
18.2 s
Fuel Tank - Standard
3240 l
856 gal (US)
Fuel Tank - With 24 hr Attachment
5350 l
1414 gal (US)
Cooling System
520 l
138 gal (US)
Engine Crankcase
288 l
76 gal (US)
Transmission
416 l
110 gal (US)
Differential - Final Drives - Front
833 l
220 gal (US)
Differential - Final Drives - Rear
757 l
200 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan
1022 l
270 gal (US)
Hydraulic Tank - Steering and Braking
379 l
100 gal (US)
Oil Renewal System (ORS)*
75.7 l
20 gal (US)
Note
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
Front
Fixed
Fixed
 
Fixed
Fixed
 
Fixed
Fixed
Rear
Trunnion
Trunnion
 
Trunnion
Trunnion
 
Trunnion
Trunnion
Oscillation Angle
9°
9°
 
+/-12.5°
+/-12.5°
 
13°
13°
Brakes
ISO 3450:2011
ISO 3450:2011
 
ISO 3450:2011
ISO 3450:2011
 
ISO 3450:2011
ISO 3450:2011
Ambient Capability Hydraulically Driven Demand Fan - Standard
43 °C
109.4 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
55 °C
131 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
53 °C
127.4 °F
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
74 dB(A)
74 dB(A)
Machine Sound Level (ISO 6395:2008)
119 dB(A)
119 dB(A)
Note
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
73 dB(A)
73 dB(A)
Machine Sound Level (ISO 6395:2008)
117 dB(A)
117 dB(A)
Note
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Steering System - Circuit
Pilot, Load Sensing
Pilot, Load Sensing
 
Pilot, load sensing
Pilot, load sensing
 
Pilot, load sensing
Pilot, load sensing
Steering System - Pump
Piston, Variable Displacement
Piston, Variable Displacement
 
Piston, variable displacement
Piston, variable displacement
 
Piston, variable displacement
Piston, variable displacement
Total Steering Angle
80 degrees
80 degrees
 
70°
70°
 
86°
86°
Steering Cycle Times - Low Idle
7.6 s
7.6 s
 
5.2 s
5.2 s
 
5.6 s
5.6 s
Steering Cycle Times - High Idle
4.3 s
4.3 s
 
3 s
3 s
 
3.4 s
3.4 s
Maximum Flow
-
 
200 l/min
52 gal (US)
 
-
Relief Valve Setting - Steering
-
 
27600 kPa
4000 psi
 
-
Maximum Flow at 1,400-1,600 rpm
-
 
-
 
270 l/min
71.3 gal/min
Steering Cut Off Pressure
-
 
-
 
30000 kPa
4351 psi
B-Pin Height - Maximum Lift
8800 mm
28.8 ft
Clearance at Maximum Lift
6039 mm
19.8 ft
Dump Angle at Maximum Lift
–50.0 degrees
–50.0 degrees
Front Axle Centerline to Bucket Tip
6688 mm
21.9 ft
Ground to Bumper Clearance
1355 mm
4.4 ft
Ground to Center of Axles
1830 mm
6 ft
Ground to Lower Hitch Clearance
898 mm
2.9 ft
Ground to Top of Exhaust Stacks
7067 mm
23.2 ft
Ground to Top of Hood
5682 mm
18.6 ft
Ground to Top of ROPS
7119 mm
23.4 ft
Maximum Overall Height - Bucket Raised
11966 mm
39.3 ft
Maximum Overall Length
19693 mm
64.6 ft
Note
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift
59.5 degrees
59.5 degrees
Rack Back Angle - Carry
47.7 degrees
47.7 degrees
Rack Back Angle - Ground Level
39.7 degrees
39.7 degrees
Reach - Maximum Lift
2946 mm
9.6 ft
Rear Axle - Centerline to Bumper
6205 mm
20.4 ft
Tread Width
4300 mm
14.1 ft
Wheel Base
6800 mm
22.3 ft
Width - Over Tires - With Bulge
5758 mm
18.8 ft
B-Pin Height - Maximum Lift
9657 mm
31.6 ft
Clearance at Maximum Lift
6896 mm
22.6 ft
Dump Angle at Maximum Lift
–50.0 degrees
–50.0 degrees
Front Axle Centerline to Bucket Tip
7383 mm
24.2 ft
Ground to Bumper Clearance
1355 mm
4.4 ft
Ground to Center of Axles
1830 mm
6 ft
Ground to Lower Hitch Clearance
898 mm
2.9 ft
Ground to Top of Exhaust Stacks
7067 mm
23.2 ft
Ground to Top of Hood
5682 mm
18.6 ft
Ground to Top of ROPS
7119 mm
23.4 ft
Maximum Overall Height - Bucket Raised
12823 mm
42.1 ft
Maximum Overall Length
20388 mm
66.9 ft
Note
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift
59.4 degrees
59.4 degrees
Rack Back Angle - Carry
53.5 degrees
53.5 degrees
Rack Back Angle - Ground Level
45 degrees
45 degrees
Reach - Maximum Lift
2884 mm
9.4 ft
Rear Axle - Centerline to Bumper
6205 mm
20.4 ft
Tread Width
4300 mm
14.1 ft
Wheel Base
6800 mm
22.3 ft
Width - Over Tires - With Bulge
5760 mm
18.8 ft
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
 
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
 
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Fuel Tank
535 l
141 gal (US)
 
555 l
147 gal (US)
Cooling System
101 l
27 gal (US)
 
-
Engine Crankcase
34 l
9 gal (US)
 
60 l
16 gal (US)
Diesel Exhaust Fluid Tank
21 l
5.5 gal (US)
 
33 l
8.7 gal (US)
Transmission
75 l
20 gal (US)
 
60 l
16 gal (US)
Differential - Final Drives - Front
186 l
49 gal (US)
 
186 l
49 gal (US)
Differential - Final Drives - Rear
170 l
45 gal (US)
 
186 l
49 gal (US)
Note
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester)* - 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. **For use of blends higher than 20% biodiesel, consult your Cat dealer
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester)* - 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. **For use of blends higher than 20% biodiesel, consult your Cat dealer
 
All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases: Up to B20 biodiesel (FAME) ** Up to 100% HVO and GTL renewable fuels * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Only use DEF that meets ISO 22241-1 standards.
All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases: Up to B20 biodiesel (FAME) ** Up to 100% HVO and GTL renewable fuels * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Only use DEF that meets ISO 22241-1 standards.
Cooling System - Jacket Water
-
 
112 l
30 gal (US)
Cooling Systems - Power Train
-
 
30 l
8 gal (US)
Hydraulic System - Implement/Steering
-
 
475 l
126 gal (US)
Operator Sound Level (ISO 6396)
72 dB(A)
72 dB(A)
Machine Sound Level (ISO 6395)
110 dB(A)
110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Ground to Top of ROPS
4100 mm
13.5 ft
 
4202 mm
13.8 ft
Ground to Top of Exhaust Stacks
4060 mm
13.3 ft
 
4498 mm
14.8 ft
Ground to Top of Hood
3270 mm
10.7 ft
 
3334 mm
10.9 ft
Rear Axle - Centerline to Bumper
3132 mm
10.3 ft
 
3187 mm
10.5 ft
Front Axle Centerline to Bucket Tip
4773 mm
15.7 ft
 
4661 mm
15.3 ft
Wheel Base
3810 mm
12.5 ft
 
4550 mm
14.9 ft
Maximum Overall Length
12042 mm
39.5 ft
 
12398 mm
40.7 ft
Ground to Lower Hitch Clearance
459 mm
1.5 ft
 
568 mm
1.9 ft
Clearance at Maximum Lift
3732 mm
12 ft
 
4043 mm
13.3 ft
B-Pin Height - Maximum Lift
5755 mm
18.7 ft
 
5881 mm
19.3 ft
Maximum Overall Height - Bucket Raised
7582 mm
25 ft
 
7849 mm
25.8 ft
Reach - Maximum Lift
2342 mm
7.7 ft
 
2062 mm
6.8 ft
Note
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
 
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Ground to Bumper Clearance
-
 
933 mm
3.1 ft
Ground to Center of Axles
-
 
978 mm
3.2 ft
Bucket Capacities
6.4-7.6 m3 (8.3-10 yd3)
6.4-7.6 m3 (8.3-10 yd3)
 
4.7-13 m3 (6.2-17 yd3)
4.7-13 m3 (6.2-17 yd3)
Recyclability
96%
96%
 
96%
96%
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
109 dB(A)
109 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
110 dB(A)
110 dB(A)
Ground to Top of ROPS
4202 mm
13.8 ft
Ground to Top of Exhaust Stacks
4498 mm
14.8 ft
Ground to Top of Hood
3334 mm
10.9 ft
Ground to Bumper Clearance
933 mm
3.1 ft
Rear Axle - Centerline to Bumper
3187 mm
10.5 ft
Front Axle Centerline to Bucket Tip
14 mm
14 ft
Wheel Base
4550 mm
14.9 ft
Maximum Overall Length
11991 mm
39.3 ft
Ground to Lower Hitch Clearance
568 mm
1.9 ft
Ground to Center of Axles
978 mm
3.2 ft
Clearance at Maximum Lift
3641 mm
11.9 ft
B-Pin Height - Maximum Lift
5479 mm
18 ft
Maximum Overall Height - Bucket Raised
7455 mm
24.5 ft
Reach - Maximum Lift
1981 mm
6.5 ft
Note
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Ground to Top of ROPS
4221 mm
13.8 ft
Ground to Top of Exhaust Stacks
4214 mm
13.8 ft
Ground to Top of Hood
3334 mm
10.9 ft
Ground to Bumper Clearance
933 mm
3.1 ft
Rear Axle - Centerline to Bumper
3187 mm
10.5 ft
Front Axle Centerline to Fork Tip
5023 mm
16.5 ft
Wheel Base
4550 mm
14.9 ft
Maximum Overall Length
12761 mm
41.9 ft
Ground to Lower Hitch Clearance
568 mm
1.9 ft
Ground to Center of Front Axle
978 mm
3.2 ft
Fork Height with Level Arms
2474 mm
8.1 ft
Fork Top Clamp Opening
4006 mm
13.1 ft
Fork Height at Maximum Lift
5242 mm
17.2 ft
Hinge Pin Height at Maximum Lift
4918 mm
16.1 ft
Dump Angle at Maximum Lift
-39.4 °
-39.4 °
X
This site uses and sets "cookies" on your computer to help make this website better. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.
Confirm