Excavators

Compare Models

317
317
  • 313
  • 315
  • 315 GC
313
  • 315
  • 315 GC
  • 317
315
  • 313
  • 315 GC
  • 317
UNITS:
Metric
Imperial
Net Power - ISO 9249
98.9 kW
133 hp
 
80.9 kW
108 hp
 
80.9 kW
108 hp
Net Power - ISO 9249 (DIN)
134 hp (metric)
134 hp (metric)
 
110 hp (metric)
110 hp (metric)
 
110 hp (metric)
110 hp (metric)
Engine Model
Cat C3.6
Cat C3.6
 
Cat C3.6
Cat C3.6
 
Cat C3.6
Cat C3.6
Engine Power - ISO 14396:2002
100 kW
134 hp
 
82 kW
110 hp
 
82 kW
110 hp
Engine Power - ISO 14396 (DIN)
136 hp (metric)
136 hp (metric)
 
111 hp (metric)
111 hp (metric)
 
111 hp (metric)
111 hp (metric)
Bore
98 mm
4 in
 
98 mm
4 in
 
98 mm
4 in
Stroke
120 mm
5 in
 
120 mm
5 in
 
120 mm
5 in
Displacement
3.6 l
220 in³
 
3.6 l
220 in³
 
3.6 l
220 in³
Biodiesel Capability
Up to B20¹
Up to B20¹
 
Up to B20¹
Up to B20¹
 
Up to B20¹
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
 
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
 
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
 
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
 
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
 
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
 
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Main System - Maximum Flow
296 L/min (78 gal/min)
296 L/min (78 gal/min)
 
247 L/min (65 gal/min)
247 L/min (65 gal/min)
 
276 l/min (73 gal/min)
276 l/min (73 gal/min)
Maximum Pressure - Equipment
35000 kPa
5076 psi
 
35000 kPa
5075 psi
 
35000 kPa
5075 psi
Maximum Pressure - Travel
35000 kPa
5076 psi
 
35000 kPa
5075 psi
 
35000 kPa
5075 psi
Maximum Pressure - Swing
25800 kPa
3741 psi
 
26000 kPa
3770 psi
 
26000 kPa
3770 psi
Swing Speed
8.7 r/min
8.7 r/min
 
11.5 r/min
11.5 r/min
 
12 r/min
12 r/min
Maximum Swing Torque
64.6 kN·m
47647 lbf·ft
 
35 kN·m
25741 lbf·ft
 
35 kN·m
25815 lbf·ft
Operating Weight
18400 kg
40500 lb
 
13800 kg
30400 lb
 
15400 kg
34000 lb
Fuel Tank Capacity
271 l
71.6 gal (US)
 
258 l
68.2 gal (US)
 
187 l
49 gal (US)
Cooling System
22 l
5.8 gal (US)
 
15 l
4 gal (US)
 
15 l
4 gal (US)
Engine Oil
11 l
2.9 gal (US)
 
8 l
2.1 gal (US)
 
8 l
2 gal (US)
Final Drive - Each
6 l
1.6 gal (US)
 
3 l
0.8 gal (US)
 
3 l
1 gal (US)
Hydraulic System - Including Tank
94 l
24.8 gal (US)
 
85 l
22.5 gal (US)
 
85 l
22.5 gal (US)
Hydraulic Tank
87 l
23 gal (US)
 
70 l
18.5 gal (US)
 
72 l
19 gal (US)
DEF Tank
22 l
5.9 gal (US)
 
21 l
5.6 gal (US)
 
21 l
6 gal (US)
Boom
Reach 5.1 m (16'9")
Reach 5.1 m (16'9")
 
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
 
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Stick
Reach R2.6 m (8'6")
Reach R2.6 m (8'6")
 
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
 
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Bucket
GD 1.00 m³ (1.31 yd³)
GD 1.00 m³ (1.31 yd³)
 
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
 
GD 0.68 m³ (0.89 yd³)
GD 0.68 m³ (0.89 yd³)
Shipping Height - Top of Cab
2930 mm
9.6 ft
 
2810 mm
9.3 ft
 
2810 mm
9.3 ft
Handrail Height
2940 mm
9.7 ft
 
2810 mm
9.3 ft
 
2860 mm
9.4 ft
Shipping Length
8550 mm
28.1 ft
 
7780 mm
25.5 ft
 
7440 mm
24.4 ft
Tail Swing Radius
2500 mm
8.2 ft
 
2190 mm
7.2 ft
 
1570 mm
5.2 ft
Counterweight Clearance
1010 mm
3.3 ft
 
915 mm
3 ft
 
880 mm
2.9 ft
Ground Clearance
430 mm
1.4 ft
 
445 mm
1.5 ft
 
440 mm
1.4 ft
Track Length
3970 mm
13 ft
 
3750 mm
12.3 ft
 
3750 mm
12.3 ft
Length to Center of Rollers
3170 mm
10.4 ft
 
3040 mm
10 ft
 
3040 mm
10 ft
Track Gauge
1990 mm
6.5 ft
 
1990 mm
6.5 ft
 
1990 mm
6.5 ft
Transport Width
2490 mm
8.2 ft
 
2490 mm
8.2 ft
 
2490 mm
8.2 ft
Shipping Length - with Blade
-
 
8050 mm
26.4 ft
 
8010 mm
26.3 ft
Maximum Digging Depth
6100 mm
20 ft
 
5840 mm
19.2 ft
 
5990 mm
19.7 ft
Boom
Reach 5.1 m (16'9")
Reach 5.1 m (16'9")
 
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
 
Reach 4.65 m (15'3")
Reach 4.65 m (15'3")
Stick
Reach R2.6 m (8'6")
Reach R2.6 m (8'6")
 
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
 
Reach R3.0 m (9'10")
Reach R3.0 m (9'10")
Bucket
GD 1.00 m³ (1.31 yd³)
GD 1.00 m³ (1.31 yd³)
 
GD 0.53 m³ (0.69 yd³)
GD 0.53 m³ (0.69 yd³)
 
GD 0.68 m³ (0.89 yd³)
GD 0.68 m³ (0.89 yd³)
Maximum Reach at Ground Level
8790 mm
28.8 ft
 
8660 mm
28.4 ft
 
8690 mm
28.5 ft
Maximum Cutting Height
8940 mm
29.3 ft
 
8830 mm
29 ft
 
9690 mm
31.8 ft
Maximum Loading Height
6270 mm
20.6 ft
 
6420 mm
21.1 ft
 
7220 mm
23.7 ft
Minimum Loading Height
2290 mm
7.5 ft
 
1600 mm
5.3 ft
 
2080 mm
6.8 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
5880 mm
19.3 ft
 
5860 mm
19.3 ft
 
5810 mm
19.1 ft
Maximum Vertical Wall Digging Depth
4980 mm
16.3 ft
 
5190 mm
17 ft
 
5180 mm
17 ft
Minimum Working Equipment Radius
2980 mm
9.8 ft
 
2570 mm
8.4 ft
 
2240 mm
7.3 ft
Bucket Digging Force - ISO
123 kN
27650 lbf
 
98.67 kN
22180 lbf
 
98.67 kN
22180 lbf
Stick Digging Force - ISO
80 kN
17980 lbf
 
59.29 kN
13330 lbf
 
59.29 kN
13330 lbf
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.418 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.418 metric tonnes.
 
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
 
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
Recyclability
95%
95%
 
95%
95%
X
This site uses and sets "cookies" on your computer to help make this website better. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.
Confirm