Stump Grinders

Compare Models

SG36
UNITS:
Metric
Imperial
Required Hydraulics
High Flow XPS
High Flow XPS
 
Standard Flow
Standard Flow
Cutting Wheel Diameter - With Teeth
547 mm
21.5 in
 
547 mm
21.5 in
Cutting Depth - Below Ground
521 mm
20.5 in
 
521 mm
20.5 in
Cutting Head Extension
280 mm
11 in
 
280 mm
11 in
Cutting Head Speed at Maximum Flow
1230 rpm
1230 rpm
 
993 rpm
993 rpm
Cutting Head Swing Range
70 degrees
70 degrees
 
70 degrees
70 degrees
Cutting Height - Above Ground
470 mm
18.5 in
 
470 mm
18.5 in
Cutting Wheel Width - With Teeth
83 mm
3.3 in
 
83 mm
3.3 in
Cutting Width - Full Swing Range
1524 mm
60 in
 
1524 mm
60 in
Drive Method
Gerotor Motor- Direct
Gerotor Motor- Direct
 
Gerotor Motor- Direct
Gerotor Motor- Direct
Drive Shaft Torque at Maximum Pressure
469 N·m
345.9 lb/ft
 
295 N·m
217.6 lb/ft
Motor Displacement
100 cm³
6.1 in³
 
80 cm³
4.9 in³
Optimal Hydraulic Pressure
207-310 bar (3000-4500 psi)
207-310 bar (3000-4500 psi)
 
145-235 bar (2100-3400 psi)
145-235 bar (2100-3400 psi)
Overall Height
813 mm
32 in
 
730 mm
28.7 in
Overall Length
1737 mm
68.4 in
 
1737 mm
68.4 in
Overall Width
1175 mm
46.3 in
 
1175 mm
46.3 in
Optimal Hydraulic Flow
95-125 L/min (25-33 gpm)
95-125 L/min (25-33 gpm)
 
42-86 L/min (11-23 gpm)
42-86 L/min (11-23 gpm)
Weight
400 kg
881.8 lb
 
379 kg
835.6 lb
Number of Carbide Teeth per Cutting Wheel
32
32
 
32
32
X
This site uses and sets "cookies" on your computer to help make this website better. By continuing to use this site without changing your settings, you are agreeing to our use of cookies.
Confirm